Inrush Current Limiters (ICL)

Part Number	Description / PDF	Quantity
SG330 Ametherm	ICL 4 OHM 20% 14A 22.86MM	1863
MS22 50004-B Ametherm	ICL 50 OHM 25% 4A 23MM	0
SG311 Ametherm	ICL 5 OHM 15% 7A 15.24MM	0
SG307 Ametherm	ICL 2.5 OHM 15% 15A 22.86MM	0
MM35 1R550 Ametherm	ICL 1.5 OHM 25% 50A 68MM	4
SL15 5R007-B Ametherm	ICL 5 OHM 20% 7A 16MM	0
SL05 30001-A Ametherm	ICL 30 OHM 5% 250MA 6MM	0
MS32 7R015 Ametherm	ICL 7 OHM 20% 15A 31MM	0
SL32 0R230 Ametherm	ICL 300 MOHM 25% 30A 31MM	1373
MS35 0R550 Ametherm	ICL 500 MOHM 50A 35MM	224
MS22 12103 Ametherm	ICL 120 OHM 25% 3A 23MM	0
SL22 2R515 Ametherm	ICL 2.5 OHM 20% 15A 22MM	15356
SL32 1R030 Ametherm	ICL 1 OHM 20% 30A 31MM	508
SL10 50001-B Ametherm	ICL 50 OHM 25% 1.1A 10MM	0
SL10 25002 Ametherm	ICL 25 OHM 25% 2A 10MM	198
SL15 12102-B Ametherm	ICL 120 OHM 25% 2A 15MM	0
SL15 10006 Ametherm	ICL 10 OHM 20% 6A 16MM	4841
SL15 2R509 Ametherm	ICL 2.5 OHM 20% 9A 16MM	0
SL32 1R030-B Ametherm	ICL 1 OHM 20% 30A 31MM	618
SL22 60003 Ametherm	ICL 60 OHM 25% 3A 22MM	0

Inrush Current Limiters (ICL)

1. Overview

Inrush Current Limiters (ICL) are electronic components designed to suppress peak currents during device startup, protecting circuits from thermal and electrical stress. These transient currents, often 10-100 times higher than steady-state levels, occur in capacitive or inductive loads like power supplies, motors, and transformers. Modern electronics increasingly rely on ICLs to ensure system reliability, comply with safety standards, and extend product lifespans.

2. Main Types & Functional Classification

Type	Functional Characteristics	Application Examples
NTC Thermistor ICL	Resistance decreases with temperature rise, self-resetting capability	Switching power supplies, LED drivers
PTC Thermistor ICL	Resistance increases with temperature, latching protection	Motor start circuits, battery management systems
Active ICL	Electronic control using MOSFETs/IGBTs with precise timing	High-precision industrial equipment
Hybrid ICL	Combines passive and active elements for optimized performance	Electric vehicle charging stations

3. Structure & Composition

ICLs typically consist of three key elements:

Sensing Element: Thermally responsive material (e.g., NTC ceramic) or semiconductor junctions
Conductive Path: Silver/palladium electrodes in thermistors or MOSFET channels in active devices
Encapsulation: Epoxy or ceramic coatings for environmental protection

Active ICLs additionally integrate control ICs, gate drivers, and heat dissipation structures.

4. Key Technical Specifications

Parameter	Description	Importance
Maximum Steady-State Current (I_max)	Rated operational current after inrush suppression	Determines continuous load capacity
Response Time (t_response)	Time to activate current limiting function	Protects against fast transient events
Clamping Voltage (V_clamp)	Maximum voltage during limiting operation	Prevents downstream component damage
Operating Temperature Range	Functional temperature limits	Ensures reliability in extreme environments
Energy Absorption (I t)	Total energy handling capability	Defines survival under fault conditions

5. Application Fields

Major industries utilizing ICLs include:

Consumer Electronics: Power adapters, HVAC systems
Industrial: Variable frequency drives, welding machines
Automotive: EV charging stations, onboard chargers
Medical: MRI power systems, patient monitors

Typical case: NTC ICLs reduce 50A startup surges to 5A in 500W switching power supplies.

6. Leading Manufacturers & Products

Manufacturer	Product Series	Key Features
TDK Corporation	B59xxx Series	High-reliability NTCs for automotive applications
Littelfuse	PTCLxxx Series	AEC-Q100 qualified PTC devices
Bel Fuse	0Zxxx Series	Multi-layer ceramic thermistors
EPCOS (TDK)	B25xxx Series	Hybrid ICLs with integrated sensors

7. Selection Guidelines

Critical factors for proper ICL selection:

Match I_max with system steady-state requirements (+20% margin)
Verify V_rated exceeds peak AC voltage by 50%
Consider ambient temperature effects on performance
Evaluate reset time for thermistor-based solutions
For active ICLs: Confirm compatibility with control signals

Example: A 240VAC motor drive requires an ICL with 15A I_max and 300V_clamp.

8. Industry Trends

Emerging developments include:

Miniaturization: 0603-sized active ICLs for mobile devices
Wide bandgap integration: SiC/GaN-based hybrid devices
Smart ICLs: Embedded current monitoring and diagnostics
Material innovation: Graphene-enhanced thermistors

Market growth driven by EV charging infrastructure and renewable energy systems, projected at 7.2% CAGR through 2027.