Transistors - FETs, MOSFETs

Transistors - FETs, MOSFETs - Single

Part Number	Description / PDF	Quantity
EPC2030 EPC	GANFET NCH 40V 31A DIE	3077
EPC2218 EPC	GANFET N-CH 100V DIE	12780
EPC2034 EPC	GANFET N-CH 200V 48A DIE	33990
EPC2024 EPC	GANFET NCH 40V 60A DIE	4635
EPC2051 EPC	GANFET N-CH 100V 1.7A DIE	22528
EPC2021 EPC	GANFET N-CH 80V 90A DIE	12083
EPC8002 EPC	GANFET N-CH 65V 2A DIE	22364
EPC2014 EPC	GANFET N-CH 40V 10A DIE OUTLINE	0
EPC2001 EPC	GANFET N-CH 100V 25A DIE OUTLINE	0
EPC2049ENGRT EPC	GANFET N-CH 40V 16A DIE	0
EPC2010 EPC	GANFET N-CH 200V 12A DIE	0
EPC2015 EPC	GANFET N-CH 40V 33A DIE OUTLINE	0
EPC2031ENGRT EPC	GANFET NCH 60V 31A DIE	0
EPC2007 EPC	GANFET N-CH 100V 6A DIE OUTLINE	0
EPC2016 EPC	GANFET N-CH 100V 11A DIE	0
EPC2012 EPC	GANFET N-CH 200V 3A DIE	0
EPC2030ENGRT EPC	GANFET NCH 40V 31A DIE	0
EPC2018 EPC	GANFET N-CH 150V 12A DIE	0
EPC2059ENGRT EPC	TRANS GAN 170V .009 OHM BUMP DIE	0
EPC2025 EPC	GANFET N-CH 300V 4A DIE	0

Transistors - FETs, MOSFETs - Single

1. Overview

Field-Effect Transistors (FETs) and Metal-Oxide-Semiconductor FETs (MOSFETs) are voltage-controlled semiconductor devices that regulate current flow through an electric field. As fundamental components in modern electronics, they offer advantages such as high input impedance, low power consumption, and fast switching capabilities. Single discrete FETs/MOSFETs are widely used in power management, signal amplification, and switching applications across industries.

2. Main Types and Functional Classification

Type	Functional Characteristics	Application Examples
Junction FET (JFET)	Voltage-controlled depletion mode operation, low noise	Low-noise amplifiers, analog switches
Enhancement Mode MOSFET	Normally-off device, requires positive V_GS to conduct	Power supplies, motor drives
Depletion Mode MOSFET	Normally-on device, requires negative V_GS to block	Radio frequency amplifiers, load switches
Insulated Gate Bipolar Transistor (IGBT)	Combines MOSFET input with bipolar output, high current capacity	High-power industrial equipment, electric vehicles

3. Structure and Composition

A typical MOSFET structure includes three terminals: Source, Gate, and Drain. The gate is insulated by a thin layer of silicon dioxide (SiO₂), forming a capacitive control interface. The channel between source and drain is formed in a silicon substrate. Advanced devices use materials like silicon carbide (SiC) or gallium nitride (GaN) for higher performance. Packaging options include TO-220, DPAK, and SOT-23 for different thermal and space requirements.

4. Key Technical Specifications

Parameter	Description and Importance
V_DS (Drain-Source Voltage)	Maximum voltage rating between drain and source; determines breakdown tolerance
I_D (Drain Current)	Maximum continuous current capacity; critical for power handling
R_DS(on)	On-state resistance; impacts conduction losses and efficiency
V_GS(th) (Threshold Voltage)	Voltage required to form channel; determines control signal compatibility
Q_G (Gate Charge)	Charge required for switching; affects switching speed and driver requirements
P_D (Power Dissipation)	Maximum power handling capability; dictates thermal management needs

5. Application Fields

Consumer Electronics: Mobile phone chargers, notebook power adapters
Industrial: Motor drives, uninterruptible power supplies (UPS)
Automotive: Electric vehicle (EV) battery management systems, HEV inverters
Telecommunications: Base station power amplifiers, optical network transceivers
Renewable Energy: Solar micro-inverters, wind turbine converters

6. Leading Manufacturers and Products

Manufacturer	Representative Product	Key Features
Texas Instruments	CSD18534Q5A	60V, 4.2m R_DS(on), automotive-grade
STMicroelectronics	STP55NF06	55A, 60V, high-speed switching
Infineon Technologies	IPB041N06N3	0.41 , 600V, TO-220 package
ON Semiconductor	NDS355AN	Depletion mode, 300mA, RF applications

7. Selection Guidelines

Key considerations include:

Voltage and current requirements under operating conditions
Thermal performance (R_DS(on), package thermal resistance)
Switching speed vs. conduction loss trade-off
Gate drive compatibility with control circuitry
Environmental factors (temperature, vibration, humidity)
Cost-performance balance for volume production

8. Industry Trends

Current trends include:

Adoption of wide bandgap materials (SiC, GaN) for higher efficiency
Advanced packaging technologies (double-sided cooling, copper clip)
Integration with gate drivers and protection circuits
Miniaturization through trench and shielded gate structures
Development of automotive-qualified devices for EVs and ADAS