| Image | Part Number | Description / PDF | Quantity | Rfq |
|---|---|---|---|---|
 |
Woodhead - Molex |
4300-1537 DIE FOR 69008-1124 |
59 |
|
 |
Connex (Amphenol RF) |
TOOL POSITIONER RG-174/316 |
0 |
|
 |
Vitelec / Cinch Connectivity Solutions |
CENTER CONTACT POSITIONER |
3 |
|
 |
HARTING |
HYDRAULIC CRIMP TOOL 120KN CRIMP |
1 |
|
 |
Tempo Communications |
DIE SET CONN RG174/RG179 SM COAX |
5 |
|
 |
TE Connectivity AMP Connectors |
DIE SET SDE PREMIUM RG59/62 |
0 |
|
 |
Astro Tool Corp. |
POSITIONER |
5 |
|
 |
TE Connectivity AMP Connectors |
TOOL SKT POSITION USE/W 601966-1 |
9 |
|
 |
Connex (Amphenol RF) |
DIE SET HEX .042 .068 .255 .278 |
0 |
|
 |
Panduit Corporation |
DIEINSERT,CA9APPLICATOR,4B,RD,EA |
21 |
|
 |
Stewart Connector |
TOOL FERRULE STN INSRT .150-.179 |
0 |
|
 |
Panduit Corporation |
DIEINSERT,CA9APPLICATOR,1AD,RD,E |
1 |
|
 |
Janesville Tool & Mfg. Inc. |
FOUR POST DIE SET |
10 |
|
 |
Panduit Corporation |
CRIMP DIE, CRIMPS GCE500-500 |
139 |
|
 |
Woodhead - Molex |
COEUR CRIMP 1/0 CST DIE SET |
2 |
|
 |
HARTING |
DSUB MIXED DIE FOR OUTER CONDUCT |
0 |
|
 |
Paladin Tools (Greenlee Communications) |
DIE SET CONTACT OBARREL 30-18AWG |
0 |
|
 |
Tempo Communications |
DIE SET FERRULE WIRE 22-10AWG |
10 |
|
 |
Panduit Corporation |
CRIMP DIE |
236 |
|
 |
TE Connectivity AMP Connectors |
HYDRAULIC CRIMP C-HEAD |
1 |
|
Crimpers - Crimp Heads and Die Sets are precision tools used to deform metal components (typically terminals or connectors) to establish secure electrical or mechanical connections. These systems are critical in industries requiring high reliability, such as automotive, aerospace, and electronics manufacturing. Modern advancements focus on automation, precision, and material compatibility to meet evolving industrial standards.
| Type | Functional Features | Application Examples |
|---|---|---|
| Manual Crimp Heads | Hand-operated, adjustable force control | Prototyping, low-volume production |
| Automatic Crimp Heads | Motor-driven, programmable force/position | High-speed wire harness assembly |
| Hydraulic Crimp Heads | High-force output, consistent pressure | Heavy-duty cable termination |
| Dual-Action Die Sets | Multi-stage crimping for complex geometries | Coaxial connector assembly |
| Quick-Change Die Sets | Modular design for rapid tool swapping | Mass production with frequent changeovers |
A typical crimping system consists of: - Frame: Rigid base structure (steel/aluminum) for vibration resistance - Crimping Module: Contains hydraulic/pneumatic actuators or mechanical linkages - Die Set Assembly: Precision-machined upper (punch) and lower (anvil) dies - Positioning System: Linear guides and digital encoders for 0.01mm accuracy - Force Transmission Components: Cam mechanisms or servo-driven systems - Safety Features: Emergency stop circuits and overload protection
| Parameter | Importance |
|---|---|
| Crimping Force (kN) | Determines joint integrity and material compatibility |
| Working Range (mm) | Defines applicable terminal sizes |
| Repeatability ( m) | Ensures consistent connection quality |
| Cycle Rate (units/hour) | Impacts production throughput |
| Durability (cycles before wear) | Reduces maintenance frequency |
| Material Hardness (HRC) | Affects die lifespan and precision retention |
Primary industries include: - Automotive (wire harness assembly lines) - Telecommunications (fiber optic connector termination) - Aerospace (high-reliability avionics connections) - Renewable Energy (solar panel cable termination) - Consumer Electronics (miniaturized connector crimping) - Industrial Automation (PLC terminal block assembly)
| Manufacturer | Representative Product | Key Features |
|---|---|---|
| TE Connectivity | Crimptool XE3 | AI-powered force control, 0.02mm repeatability |
| KOMAX | Zeta 1200 | Multi-axis robotic integration, 4,000 crimps/hour |
| Sumitomo Electric | CT-Pro2 | Laser-guided die alignment system |
| Yazaki Corporation | WBC-RX7 | Hybrid electro-hydraulic actuation |
Key considerations: - Match crimp force to terminal material thickness (e.g., 1.2mm Cu requires 8-10kN) - Verify compatibility with industry standards (IPC/WHMA-A-620) - Assess production volume requirements (manual vs. automatic) - Prioritize modular systems for multi-product lines - Factor in calibration intervals and die replacement costs - Consider IoT-enabled models for predictive maintenance
Current developments include: - Integration with Industry 4.0 through real-time data logging - Adoption of carbide-coated dies for 300% longer lifespan - Miniaturization for EV battery connection applications - Growth in demand for 0.1mm precision in 5G infrastructure - Shift toward energy-efficient servo-driven systems (30% power reduction) - Increased adoption of vision systems for automated quality control