| Image | Part Number | Description / PDF | Quantity | Rfq |
|---|---|---|---|---|
 |
DPDT, 2 FUNC, PDSO16 |
50928 |
|
|
 |
Zetex Semiconductors (Diodes Inc.) |
IC VIDEO MUX/DEMUX 2X1 16SOIC |
0 |
|
 |
Maxim Integrated |
IC VIDEO SWITCH DUAL SPST 16SOIC |
149350 |
|
 |
NXP Semiconductors |
IC MUX/DEMUX 2:1 PCI 20DHVQFN |
2640 |
|
 |
Intersil (Renesas Electronics America) |
SPDT, 2 FUNC, 1 CHANNEL, CMOS |
1326 |
|
 |
Texas Instruments |
TS3A26746E 2 X 2 CROSSPOINT SWIT |
3464145 |
|
 |
Analog Devices, Inc. |
IC DEMUX 1 X 1:2 24CQFN |
0 |
|
 |
Analog Devices, Inc. |
IC CROSSPOINT SW 16X8 72LFCSP |
12 |
|
 |
Zetex Semiconductors (Diodes Inc.) |
IC USB 2.0 SWITCH 10TQFN |
0 |
|
 |
Analog Devices, Inc. |
IC VIDEO MULTIPLEXER 4X1 14SOIC |
82 |
|
 |
Zetex Semiconductors (Diodes Inc.) |
PCIE SWITCH W-QFN2545-30 |
915 |
|
 |
Zetex Semiconductors (Diodes Inc.) |
IC SWITCH 2:1 10 OHM RGB 16QSOP |
0 |
|
 |
Texas Instruments |
DATA ACQ PLEXERS/SWITCHES |
0 |
|
 |
Analog Devices, Inc. |
SPST, 1 CHANNEL, CMOS |
15148 |
|
 |
LOW VOLTAGE DUAL-SPDT (0.4OHM) A |
655464 |
|
|
 |
Analog Devices, Inc. |
MAX311 CMOS RF/VIDEO MULTIPLEXER |
125 |
|
 |
Texas Instruments |
IC ETHERNET SWITCH 16X8 36VQFN |
336 |
|
 |
ROHM Semiconductor |
IC VIDEO SIGNAL SWITCHERS 16SSOP |
4294 |
|
 |
Analog Devices, Inc. |
IC VIDEO MULTIPLEXER 2X1 24SSOP |
0 |
|
 |
Zetex Semiconductors (Diodes Inc.) |
IC SWITCH 2:1 5 PORT 24QSOP |
23 |
|
Special Purpose Analog Switches are semiconductor devices designed to route analog signals in specialized applications where standard switches cannot meet specific performance requirements. These ICs use MOSFET-based structures to control signal paths with optimized parameters for voltage range, frequency response, and signal integrity. Their importance in modern electronics stems from enabling precise signal management in critical systems like medical imaging, industrial automation, and high-frequency communication equipment.
| Type | Functional Features | Application Examples |
|---|---|---|
| High-Voltage Switches | Operate at >20V, enhanced isolation | Power supply switching in test equipment |
| High-Frequency Switches | GHz-range operation, low capacitance | RF signal routing in 5G infrastructure |
| Precision Switches | Ultra-low leakage (pA range), minimal distortion | Medical diagnostic equipment sensors |
| High-Current Switches | Handles >1A continuous current | Industrial motor control systems |
Typical architecture includes:
Specialized variants incorporate materials like gallium nitride (GaN) for high-power applications and silicon-on-insulator (SOI) for RF performance optimization.
| Parameter | Description | Importance |
|---|---|---|
| RON (On-Resistance) | Resistance in conducting state | Affects signal attenuation and power loss |
| IOFF (Off-Leakage) | Current in non-conducting state | Determines signal isolation quality |
| Bandwidth | Frequency range of effective operation | Limits maximum usable signal rate |
| Voltage Range | Operating voltage limits | Defines system compatibility |
| Switching Speed | Transition time between states | Impacts real-time control capabilities |
| Manufacturer | Product Family | Key Specifications |
|---|---|---|
| TI (Texas Instruments) | TS5A23157 | 5V, 1 RON, 40MHz bandwidth |
| Analog Devices | ADG5412 | 44V, 150 RON, -40 C to +125 C |
| NXP Semiconductors | PCA9546A | I2C-controlled, 4-channel, 5.5V |
| Maxim Integrated | MAX4735 | High-current, 1A rating |
Key considerations include:
Current development directions include:
Market growth is driven by 5G infrastructure (25% CAGR in RF switches) and EV battery management systems requiring high-voltage switching.