Pulse Transformers

Part Number	Description / PDF	Quantity
H5004ENLT PulseLarsen Antenna	PULSE XFMR 1CT:1CT TX 1CT:1CT RX	0
HX1234NL PulseLarsen Antenna	MODULE XFRMR ETHERNET LAN 40SOIC	863
23Z467SMNLT PulseLarsen Antenna	TRANSFORMER 10BASE-T LAN 16SOIC	2739
E2467NL PulseLarsen Antenna	XFRMR ISOL 10BASE-T 1:2 SMD	0
T7015NLT PulseLarsen Antenna	XFRMR 64KBPS 1:2CT/1:2CT 20MH	0
H5019NLT PulseLarsen Antenna	TRANSFORMER MODULE GIGABIT 1PORT	4952
H5015FNL PulseLarsen Antenna	PULSE XFMR 1CT:1CT TX 1CT:1CT RX	0
PA2369NLT PulseLarsen Antenna	PULSE XFMR 37UH	191910950
PA0184NL PulseLarsen Antenna	PULSE XFMR 1:1 1.2MH	1258
H1270FNL PulseLarsen Antenna	PULSE XFMR 1CT:1CT TX 1CT:1CT RX	800
HM2108NL PulseLarsen Antenna	XFMR CMC MODULE AECQ BATT MNGT	1317
PG1096.333NLT PulseLarsen Antenna	PULSE XFMR 29.5UH	0
HM1236NL PulseLarsen Antenna	XFMR CMC MODULE AECQ BATT MNGT	87
PA3855.006NL PulseLarsen Antenna	PULSE XFMR 21UH	907
HX2019NL PulseLarsen Antenna	MODULE MAGNETICS POE SINGLE VOIP	3010
PA0184NLT PulseLarsen Antenna	PULSE XFMR 1:1 1.2MH	7715
B8841NL PulseLarsen Antenna	PULSE XFMR ETSI 600 OHM	0
H5084FNLT PulseLarsen Antenna	PULSE XFMR 1CT:1CT TX 1CT:1CT RX	212
HM2108NLT PulseLarsen Antenna	MDL, SIN, XFMR-CMC, 1:1, 4.3KV,	0
H5084NLT PulseLarsen Antenna	MODULE MAGNETIC 1PORT 1000BASE-T	0

Pulse Transformers

1. Overview

Pulse transformers are specialized electromagnetic devices designed to transfer electrical pulse signals between circuits while maintaining galvanic isolation. They play a critical role in modern electronics by enabling efficient signal transmission, voltage level conversion, and noise suppression. Their unique ability to handle fast transient signals makes them essential in power electronics, telecommunications, and industrial control systems.

2. Main Types and Functional Classification

Type	Functional Features	Application Examples
Signal Pulse Transformer	High bandwidth, fast rise time (ns level), low distortion	Digital communication interfaces (RS485, Ethernet)
Power Pulse Transformer	High voltage isolation (>1kV), high efficiency (>90%)	Switch-mode power supplies (SMPS), motor drives
High-Voltage Pulse Transformer	Multi-kV insulation, partial discharge resistance	X-ray generators, radar systems
Wideband Pulse Transformer	Frequency range: 100kHz-100MHz, flat response curve	RF amplifiers, test equipment

3. Structure and Components

Typical construction includes:

Primary/secondary windings: Enamelled copper wire with precise turn ratio
Magnetic core: Ferrite (high permeability), powdered iron (high saturation)
Insulation system: Multi-layer dielectric barriers, vacuum pressure impregnation
Termination: Surface-mount pads or through-hole pins

Advanced designs use planar transformers with PCB-integrated windings for improved thermal management.

4. Key Technical Parameters

Parameter	Typical Range	Importance
Turns Ratio	1:1 to 1:100	Voltage scaling accuracy
Frequency Range	100kHz-10MHz	Signal integrity maintenance
Isolation Voltage	500V-30kV	Safety compliance (UL/IEC)
Pulse Rise Time	1ns-50ns	Digital signal fidelity
Leakage Inductance	<1 H	Efficiency optimization

5. Application Fields

Power Electronics: Isolated gate drivers for IGBT/MOSFET
Telecommunications: DSL line interface units
Medical Equipment: Patient-isolated monitoring systems
Industrial Control: PLC signal transmission
Automotive: EV battery management system (BMS) isolation

Case Study: In electric vehicle chargers, pulse transformers enable 1500V isolation between grid and battery systems while maintaining 98% signal integrity at 2MHz switching frequency.

6. Leading Manufacturers

Manufacturer	Key Product Series	Specifications
Coilcraft	Pulse-Hi Series	1:1.4 ratio, 25kV isolation, 100MHz bandwidth
Pulse Electronics	PA1538NL	1:16 ratio, 3kV isolation, 100ns rise time
TDK-Lambda	CUT100	2.5kV isolation, 2MHz frequency, SMD package

7. Selection Guidelines

Key considerations:

Match turns ratio with driver/receiver voltage requirements
Verify insulation class against system safety standards
Check frequency response vs. signal bandwidth requirements
Consider thermal rating for continuous power operation
Evaluate PCB footprint constraints (through-hole vs SMD)

8. Industry Trends

Current development directions include:

Miniaturization through nanocrystalline core materials
Integration with EMI filtering components
Increased operating frequencies (>10MHz) for 5G infrastructure
SiC/GaN compatible designs for wide bandgap power devices
Automotive-grade models for 800V EV systems