| Image | Part Number | Description / PDF | Quantity | Rfq |
|---|---|---|---|---|
 |
TE Connectivity AMP Connectors |
TOOL DIE SET FOR MICRO TIMER |
8 |
|
 |
TE Connectivity AMP Connectors |
TOOL TETRA-CRIMP DIE 12-10AWG |
0 |
|
 |
TE Connectivity AMP Connectors |
TOOL DIE ASSEMBLY |
10 |
|
 |
TE Connectivity AMP Connectors |
DIESET HEXCRIMP RG62, 59 |
2 |
|
 |
TE Connectivity AMP Connectors |
TOOL DIESET 14-26AWG ULTRAFAST |
30 |
|
 |
TE Connectivity AMP Connectors |
DIE SET SDE PREMIUM RG59/62 |
0 |
|
 |
TE Connectivity AMP Connectors |
TOOL SKT POSITION USE/W 601966-1 |
9 |
|
 |
TE Connectivity AMP Connectors |
HYDRAULIC CRIMP C-HEAD |
1 |
|
 |
TE Connectivity AMP Connectors |
ERGO DIE SET - PIDG & PLAST-GRIP |
4 |
|
 |
TE Connectivity AMP Connectors |
DIE SET MR CONN USE WITH A9996 |
8 |
|
 |
TE Connectivity AMP Connectors |
DIE SET 22-10AWG BUDGET |
2 |
|
 |
TE Connectivity AMP Connectors |
POSITIONER M22520/1-02 |
5 |
|
 |
TE Connectivity AMP Connectors |
DIE SET 8AWG |
1 |
|
 |
TE Connectivity AMP Connectors |
TOOL DIE ASSEM FOR 58522-1 |
2 |
|
 |
TE Connectivity AMP Connectors |
TOOL HEAD ASSEMBLY RCPT MTA 100 |
7 |
|
 |
TE Connectivity AMP Connectors |
DIE PIDG STRATO 69710 12-10AWG |
8 |
|
 |
TE Connectivity AMP Connectors |
DIESET HEXCRIMP RG174, 179, 180 |
11 |
|
 |
TE Connectivity AMP Connectors |
TOOL INDENTER U-DIE SOLIS #6-2 |
9 |
|
 |
TE Connectivity AMP Connectors |
TOOL DIE SET FOR XII & III+ |
8 |
|
 |
TE Connectivity AMP Connectors |
ERGO DIE MCP 4,8K E |
4 |
|
Crimpers - Crimp Heads and Die Sets are precision tools used to deform metal components (typically terminals or connectors) to establish secure electrical or mechanical connections. These systems are critical in industries requiring high reliability, such as automotive, aerospace, and electronics manufacturing. Modern advancements focus on automation, precision, and material compatibility to meet evolving industrial standards.
| Type | Functional Features | Application Examples |
|---|---|---|
| Manual Crimp Heads | Hand-operated, adjustable force control | Prototyping, low-volume production |
| Automatic Crimp Heads | Motor-driven, programmable force/position | High-speed wire harness assembly |
| Hydraulic Crimp Heads | High-force output, consistent pressure | Heavy-duty cable termination |
| Dual-Action Die Sets | Multi-stage crimping for complex geometries | Coaxial connector assembly |
| Quick-Change Die Sets | Modular design for rapid tool swapping | Mass production with frequent changeovers |
A typical crimping system consists of: - Frame: Rigid base structure (steel/aluminum) for vibration resistance - Crimping Module: Contains hydraulic/pneumatic actuators or mechanical linkages - Die Set Assembly: Precision-machined upper (punch) and lower (anvil) dies - Positioning System: Linear guides and digital encoders for 0.01mm accuracy - Force Transmission Components: Cam mechanisms or servo-driven systems - Safety Features: Emergency stop circuits and overload protection
| Parameter | Importance |
|---|---|
| Crimping Force (kN) | Determines joint integrity and material compatibility |
| Working Range (mm) | Defines applicable terminal sizes |
| Repeatability ( m) | Ensures consistent connection quality |
| Cycle Rate (units/hour) | Impacts production throughput |
| Durability (cycles before wear) | Reduces maintenance frequency |
| Material Hardness (HRC) | Affects die lifespan and precision retention |
Primary industries include: - Automotive (wire harness assembly lines) - Telecommunications (fiber optic connector termination) - Aerospace (high-reliability avionics connections) - Renewable Energy (solar panel cable termination) - Consumer Electronics (miniaturized connector crimping) - Industrial Automation (PLC terminal block assembly)
| Manufacturer | Representative Product | Key Features |
|---|---|---|
| TE Connectivity | Crimptool XE3 | AI-powered force control, 0.02mm repeatability |
| KOMAX | Zeta 1200 | Multi-axis robotic integration, 4,000 crimps/hour |
| Sumitomo Electric | CT-Pro2 | Laser-guided die alignment system |
| Yazaki Corporation | WBC-RX7 | Hybrid electro-hydraulic actuation |
Key considerations: - Match crimp force to terminal material thickness (e.g., 1.2mm Cu requires 8-10kN) - Verify compatibility with industry standards (IPC/WHMA-A-620) - Assess production volume requirements (manual vs. automatic) - Prioritize modular systems for multi-product lines - Factor in calibration intervals and die replacement costs - Consider IoT-enabled models for predictive maintenance
Current developments include: - Integration with Industry 4.0 through real-time data logging - Adoption of carbide-coated dies for 300% longer lifespan - Miniaturization for EV battery connection applications - Growth in demand for 0.1mm precision in 5G infrastructure - Shift toward energy-efficient servo-driven systems (30% power reduction) - Increased adoption of vision systems for automated quality control