| Image | Part Number | Description / PDF | Quantity | Rfq |
|---|---|---|---|---|
 |
Panasonic |
IC RF SWITCH SPDT 26.5GHZ MODULE |
0 |
|
 |
Analog Devices, Inc. |
IC RF SWITCH SPST 2.5GHZ 8MSOP |
1338 |
|
 |
Skyworks Solutions, Inc. |
IC RF SWITCH SPDT 3GHZ 12QFN |
21014 |
|
 |
Metelics (MACOM Technology Solutions) |
IC RF SWITCH SP4T 3GHZ CR-14 |
28 |
|
 |
Panasonic |
SWITCH COAX LATCH SP 26.5GHZ 12V |
0 |
|
 |
Tagore Technology |
IC RF SWITCH SPDT 5GHZ 32QFN |
0 |
|
 |
Metelics (MACOM Technology Solutions) |
IC RF SWITCH SP3T 3GHZ 16HQFN |
460 |
|
 |
Analog Devices, Inc. |
IC RF SWITCH 8GHZ 16QFN |
135 |
|
 |
Panasonic |
ARD COAXIAL SWITCH |
0 |
|
 |
Metelics (MACOM Technology Solutions) |
DIODE,SWITCH,T/R,SI |
25 |
|
 |
pSemi |
IC RF SWITCH SPDT 1.79GHZ 12QFN |
0 |
|
 |
Skyworks Solutions, Inc. |
DPDT FOR AUTOMOTIVE CV2X BASED U |
288081000 |
|
 |
Panasonic |
IC RF SWITCH SPDT 18GHZ |
0 |
|
 |
Skyworks Solutions, Inc. |
IC RF SWITCH SPDT 6GHZ 12QFN |
34265 |
|
 |
pSemi |
IC RF SWITCH SPDT 3GHZ 20QFN |
0 |
|
 |
IR (Infineon Technologies) |
RF SWITCH |
4529 |
|
 |
ABSORPTIVE SP4T, SOLID STATE SWI |
0 |
|
|
 |
Metelics (MACOM Technology Solutions) |
IC RF SWITCH SP4T 18GHZ DIE |
250 |
|
 |
Panasonic |
ARD COAXIAL SWITCH |
0 |
|
 |
Analog Devices, Inc. |
IC RF SWITCH SPDT 2.5GHZ 8MSOP |
177 |
|
RF (Radio Frequency) and IF (Intermediate Frequency) switches are critical components in wireless communication systems, enabling signal routing between transmitter, receiver, and antenna. RFID (Radio Frequency Identification) RF switches specifically manage signal paths in RFID readers and tags. These electromechanical or solid-state devices operate in frequency ranges from kHz to GHz, playing vital roles in 5G, IoT, and industrial automation.
| Type | Functional Characteristics | Application Examples |
|---|---|---|
| Electromechanical Switches | High isolation (>85dB), low insertion loss (<0.5dB), limited lifespan (107 cycles) | Lab test equipment, fixed wireless systems |
| Solid-State Switches | Fast switching speed (<20ns), 50 impedance, moderate power handling (30dBm) | 5G base stations, software-defined radios |
| MEMS Switches | Ultra-low insertion loss (0.2dB), high linearity, vacuum encapsulation | Aerospace phased arrays, medical imaging |
| RFID Antenna Switches | Impedance matching networks, HF/UHF band optimization | Smart logistics, access control systems |
Typical RF switches consist of: - Housing: Aluminum alloy or ceramic packages - Contact system: Gold-plated beryllium copper contacts - Actuator: Electromagnetic coil or MEMS membrane - RF ports: SMA/N-type connectors or surface-mount pads - Dielectric materials: PTFE or ceramic insulators
| Parameter | Typical Values | Importance |
|---|---|---|
| Frequency Range | DC-18GHz (standard) | Determines application bandwidth |
| Insertion Loss | 0.3-2.0 dB | Affects signal strength |
| Isolation | 40-100 dB | Prevents signal interference |
| Power Handling | 10W-100W | Limits maximum operational power |
| Switching Speed | 5ms-50ns | Impacts system response time |
| Manufacturer | Representative Product | Key Features |
|---|---|---|
| Keysight Technologies | U1880A | 67GHz bandwidth, 500ns switching speed |
| Analog Devices | ADG904 | 4-channel, 3GHz, CMOS process |
| STMicroelectronics | AFBR-5010 | MEMS-based, 0.15dB insertion loss |
| Infineon | BTS724G | Automotive-grade, 40V load protection |
Key considerations: - Frequency matching with system requirements - Power handling capacity with 20% safety margin - Environmental factors (temperature, vibration) - Lifecycle requirements (electromechanical vs. solid-state) - Cost vs. performance trade-offs
Future developments include: - Millimeter-wave switches for 5G/6G (28-100GHz) - Integrated passive devices (IPDs) with embedded switches - Energy-harvesting RFID switch solutions - AI-driven smart switch arrays for dynamic spectrum sharing - Nano-MEMS technology achieving sub-10ns switching