| Image | Part Number | Description / PDF | Quantity | Rfq |
|---|---|---|---|---|
 |
Metelics (MACOM Technology Solutions) |
POWER_DIVIDER,2-WAY, |
0 |
|
 |
2 WAYS CORE & WIRE POWER SPLITTE |
0 |
|
|
 |
4 WAYS CORE & WIRE POWER SPLITTE |
0 |
|
|
 |
Johanson Technology |
RF PWR DVDR 1.56GHZ-1.59GHZ 0805 |
0 |
|
 |
LTCC 90 HYBRID, 540 - 980 MHZ, 5 |
0 |
|
|
 |
Walsin Technology |
RF POWER DIVIDER 3300-5000MHZ 06 |
100 |
|
 |
TDK Corporation |
RF POWER DVDR 2.4GHZ-2.5GHZ 0603 |
665 |
|
 |
MITEQ, Inc.（L3 Narda-MITEQ） |
RF PWR DIVIDER 5GHZ-18GHZ MODULE |
25 |
|
 |
Metelics (MACOM Technology Solutions) |
POWER_DIVIDER,3-WAY, |
10 |
|
 |
2 WAYS MMIC POWER SPLITTER, 2800 |
0 |
|
|
 |
Knowles DLI |
RF POWER DVDR 11GHZ-13GHZ MODULE |
0 |
|
 |
MITEQ, Inc.（L3 Narda-MITEQ） |
RF PWR DIVIDER 2GHZ-4GHZ MODULE |
2 |
|
 |
2 WAYS CORE & WIRE POWER SPLITTE |
0 |
|
|
 |
2 WAYS CORE & WIRE POWER SPLITTE |
0 |
|
|
 |
2 WAYS CORE & WIRE POWER SPLITTE |
0 |
|
|
 |
LTCC 90 HYBRID, 675 - 1300 MHZ, |
0 |
|
|
 |
2 WAYS CORE & WIRE POWER SPLITTE |
949 |
|
|
 |
4 WAYS MMIC POWER SPLITTER, 2100 |
0 |
|
|
 |
Metelics (MACOM Technology Solutions) |
2-WAY POWER DIVIDER ,PB-FREE EQU |
10003248 |
|
 |
2 WAYS CORE & WIRE POWER SPLITTE |
0 |
|
RF/IF Power Dividers/Splitters are passive or active microwave components that split an input RF signal into two or more output signals with specific amplitude and phase relationships. They are critical in signal distribution, impedance matching, and system integration across wireless communication, test instrumentation, and RFID systems. Their ability to manage signal paths ensures optimal performance in multi-channel systems and measurement accuracy.
| Type | Functional Characteristics | Application Examples |
|---|---|---|
| Passive Power Dividers | No external power required, low insertion loss, fixed splitting ratio | Base stations, DAS systems |
| Active Power Splitters | Amplified signal distribution, adjustable gain control | Signal boosters, repeaters |
| 2-Way/3-Way/4-Way Dividers | Fixed output port configurations with phase-matched outputs | MIMO systems, phased arrays |
| Waveguide Power Dividers | High-power handling, low-loss at microwave frequencies | Satellite communications, radar |
| Microstrip Line Splitters | Compact PCB-based design, cost-effective mass production | IoT devices, RFID readers |
Typical physical structure includes: - Dielectric substrate (FR4, Rogers material) with conductive transmission lines - SMA/N-Type or waveguide connectors for RF ports - Resistive or reactive components for impedance matching - Metal housing for EMI shielding (1.5-3.0mm thickness) - Thermal management coatings for high-power models Key technologies: Wilkinson divider circuitry, quadrature hybrid couplers, and corporate feed networks implemented through PCB etching or ceramic substrates.
| Parameter | Importance |
|---|---|
| Frequency Range (0.5-40 GHz) | Determines operational bandwidth and application compatibility |
| Insertion Loss (0.2-2.5 dB) | Impacts system signal integrity and noise figure |
| Isolation (15-30 dB) | Prevents crosstalk between output ports |
| Power Handling (5-500W) | Defines maximum operational safety margin |
| VSWR (1.1:1-1.5:1) | Indicates impedance matching quality |
| Phase Balance ( 1-5 ) | Essential for coherent signal processing |
Primary industries: - Telecommunications: 5G massive MIMO base stations, fiber DAS - Test & Measurement: Vector network analyzers, spectrum analyzers - RFID Systems: UHF Gen2 reader antenna multiplexing - Aerospace: Aircraft communication navigation systems (CNS) - Industrial IoT: Smart factory sensor networks Typical equipment: Anritsu MT8000A tester, Keysight N9020B analyzer, Impinj R420 reader.
| Manufacturer | Country | Representative Product |
|---|---|---|
| Analog Devices | USA | ADP-2181 (0.5-18GHz, 3-way splitter) |
| Mini-Circuits | USA | ZFRSC-42-S+ (2-40GHz, ultra-broadband) |
| RFMW Ltd. | Canada | RF3080 (8-12GHz, waveguide divider) |
| Murata Manufacturing | Japan | NX7060 Series (Sub-6GHz, LTE applications) |
| COMSAW | Korea | CSW-1500M (1.5-2.7GHz, 4G LTE splitter) |
Key considerations: - Frequency match with system operating band (include 20% margin) - Power handling requirement (continuous vs peak power) - Channel count vs phase coherence needs - Environmental rating (IP67 for outdoor deployments) - Connector type compatibility (SMA vs N-Type vs TNC) - Cost vs performance trade-off (Wilkinson vs hybrid designs) For RFID applications, prioritize models with excellent port isolation (>25dB) to prevent tag read interference.
Current development directions: - mmWave compatibility (24-100GHz) for 5G/6G systems - Miniaturization through LTCC technology (size reduction >40%) - Integrated digital control for smart antenna systems - Improved thermal management materials (diamond substrate adoption) - Standardization of RFID-specific splitters under EPCglobal UHF Gen2v2