| Image | Part Number | Description / PDF | Quantity | Rfq |
|---|---|---|---|---|
 |
Walsin Technology |
RF DIPLEXER 2.45GHZ/5.4GHZ 0603 |
0 |
|
|
TOKO / Murata |
MULTILAYER LC FILTERS 1920MHZ RF |
0 |
|
|
CTS Corporation |
RF DUPLEXER |
0 |
|
|
TAIYO YUDEN |
RF DUPLEX 2016 CSSD BAND 21 BAL |
0 |
|
|
TAIYO YUDEN |
RF DUPLEXER 2520 CSSD BAND 2 SE |
0 |
|
|
Metelics (MACOM Technology Solutions) |
RF DIPLEXER 502.5MHZ/1.4GHZ MOD |
9215000 |
|
|
TAIYO YUDEN |
RF DUPLEXER 8SMD NO LEAD |
2745 |
|
|
Walsin Technology |
RF DIPLEXER 2.4GHZ/5GHZ ISM |
100 |
|
|
Johanson Technology |
RF DIPLEXER 1407MHZ/2.45GHZ 0805 |
0 |
|
|
TAIYO YUDEN |
RF DUPLEXER 9SMD NO LEAD |
0 |
|
|
TAIYO YUDEN |
RF DUPLEXER 1GHZ-5GHZ 8SMD |
0 |
|
|
CTS Corporation |
FILTER CER DUPLEXER 1.9GHZ SMD |
0 |
|
|
CTS Corporation |
RF DUPLEXER MONOBLOCK 3 PC PAD |
0 |
|
|
Walsin Technology |
RF DIPLEXER 2.4GHZ/5GHZ ISM |
2000 |
|
|
TAIYO YUDEN |
RF DUPLEXER 2016 CSSD BAND 2 BAL |
0 |
|
|
TAIYO YUDEN |
RF DUPLEXER 1GHZ-5GHZ 8SMD |
4625 |
|
|
TAIYO YUDEN |
RF DUPLEXER 745MHZ/782MHZ 9SMD |
3100 |
|
|
Walsin Technology |
RF DIPLEXER 2.45GHZ/5.4GHZ 0805 |
245 |
|
|
CTS Corporation |
FILTER CER DUPLXR 1.6435GHZ SMD |
0 |
|
|
Yageo |
RF DIPLEXER 2.45/5.425GHZ 0805 |
107 |
|
RF/IF multiplexers are devices that route high-frequency signals (typically 300 MHz to 6 GHz for RF, and 10 MHz to 1 GHz for IF) between multiple channels. RFID RF multiplexers specialize in managing signals for radio frequency identification systems (125 kHz to 900 MHz). These components enable efficient signal management in wireless communication, industrial automation, and IoT systems, reducing hardware complexity and cost.
| Type | Functional Features | Application Examples |
|---|---|---|
| Coaxial RF Multiplexer | Mechanical switching with high power handling (up to 100W) | Test equipment, military communication |
| MMIC-based Multiplexer | Monolithic Microwave IC integration, fast switching ( 1 s) | 5G base stations, phased array systems |
| UHF RFID Multiplexer | Supports EPCglobal Gen2 protocol, 8-16 ports | Warehouse inventory management |
| Fiber-Optic RF Multiplexer | Optical signal routing, low insertion loss (<1 dB) | Aerospace telemetry systems |
Typical construction includes: - Switch matrix (electromechanical relays or PIN diodes) - RF shielding enclosure (aluminum alloy) - SMA/N-type connectors - Control circuitry (TTL/CMOS interface) - Dielectric substrate (RO4000 series for high frequencies)
| Parameter | Value Range | Importance |
|---|---|---|
| Frequency Range | DC-18 GHz | Determines application compatibility |
| Insertion Loss | 0.3-3.5 dB | Signal integrity preservation |
| Isolation | 20-80 dB | Prevents channel cross-talk |
| Switching Speed | 10 s-10 ms | Affects system response time |
| VSWR | 1.2:1-2.0:1 | Impedance matching quality indicator |
| Vendor | Product Series | Key Features |
|---|---|---|
| Analog Devices | ADG9xx | CMOS-based, 0.1-3 GHz, 1.8-5.5V supply |
| Keysight Technologies | U2000 Series | Optical RF multiplexer with 0.05 dB accuracy |
| Nordic Semiconductor | nRF24 | 2.4 GHz, -94 dBm sensitivity for RFID |
| TE Connectivity | RF Multiplex Switch | IP67 rated for outdoor deployment |
Consider: 1. Frequency match with application band 2. Signal power handling requirements 3. Environmental conditions (temperature/humidity) 4. Control interface compatibility (SPI/UART) 5. Port count scalability 6. Cost vs. performance trade-offs
Current developments include: - Integration with AI for dynamic signal path optimization - Sub-6 GHz 5G MIMO support expansion - Development of reconfigurable intelligent surfaces (RIS) - RFID multiplexers with embedded sensing capabilities - Miniaturization using LTCC packaging technology