| Image | Part Number | Description / PDF | Quantity | Rfq |
|---|---|---|---|---|
 |
CEL (California Eastern Laboratories) |
B1010SP0-2X BLUETOOTH SMART MINI |
1 |
|
 |
CEL (California Eastern Laboratories) |
EVAL KIT B1010 BT SMART MINI MOD |
2 |
|
 |
CEL (California Eastern Laboratories) |
EVAL BOARD FOR UPC3237TK |
5 |
|
 |
CEL (California Eastern Laboratories) |
EVAL BOARD - TUNED FOR 1.57GHZ |
3 |
|
 |
CEL (California Eastern Laboratories) |
GAAS MMIC SPDT HI POWER SWITCH |
1 |
|
 |
CEL (California Eastern Laboratories) |
EVAL BOARD FOR CG2179M2 |
1 |
|
 |
CEL (California Eastern Laboratories) |
USB EVAL BOARD |
2 |
|
 |
CEL (California Eastern Laboratories) |
EVAL BOARD FOR UPD5713TK |
2 |
|
 |
CEL (California Eastern Laboratories) |
EVAL BOARD - TUNED FOR 2.33GHZ |
2 |
|
 |
CEL (California Eastern Laboratories) |
SDIO EVAL BOARD |
1 |
|
 |
CEL (California Eastern Laboratories) |
EVAL BOARD FOR CG2214M6 |
0 |
|
 |
CEL (California Eastern Laboratories) |
EVAL BOARD FOR CG2163X3 |
1 |
|
 |
CEL (California Eastern Laboratories) |
DUAL-BAND WIRELESS DPDT RF SWITC |
0 |
|
|
CEL (California Eastern Laboratories) |
EVAL BOARD FOR CG2176X3 |
0 |
|
|
CEL (California Eastern Laboratories) |
EVAL BOARD FOR CG2430X1 |
0 |
|
|
CEL (California Eastern Laboratories) |
EVAL BOARD FOR CG2415M6 |
1 |
|
|
CEL (California Eastern Laboratories) |
EVAL BOARD FOR CG2185X2 |
1 |
|
|
CEL (California Eastern Laboratories) |
GAAS MMIC SPDT HI POWER SWITCH |
0 |
|
 |
CEL (California Eastern Laboratories) |
EVAL BOARD FOR UPG2408B |
0 |
|
 |
CEL (California Eastern Laboratories) |
EVAL BOARD FOR UPB1509GV |
0 |
|
RF/IF (Radio Frequency/Intermediate Frequency) and RFID (Radio Frequency Identification) evaluation and development kits are hardware platforms designed to facilitate the testing, prototyping, and optimization of wireless communication systems. These kits enable engineers to validate circuit performance, debug protocols, and accelerate product development. They play a critical role in modern technologies such as IoT, 5G, smart logistics, and industrial automation by bridging theoretical design and real-world deployment.
| Type | Functional Features | Application Examples |
|---|---|---|
| RF Evaluation Boards | Focus on RF signal generation, modulation/demodulation, and impedance matching testing | 5G base station prototyping, Wi-Fi 6 module testing |
| RFID Development Kits | Support NFC, UHF/HF RFID tag/reader development with protocol analysis | Smart retail payment systems, asset tracking solutions |
| Multifunctional Development Boards | Integrate RF, microcontroller, and sensor interfaces for system-level testing | Industrial IoT gateway development, drone communication modules |
Typical products consist of: - Base PCB: Multilayer board with RF shielding compartments - RF Front-End: Includes LNA (Low Noise Amplifier), PA (Power Amplifier), and frequency synthesizers - Processing Unit: Embedded FPGA or MCU for real-time signal processing - Interface Ports: USB-C, SMA connectors, GPIO headers for peripheral expansion - Power Management: Regulated voltage supplies for different RF components
| Parameter | Description | Importance |
|---|---|---|
| Frequency Range | Operational bandwidth (e.g., 300 MHz - 6 GHz) | Determines application compatibility |
| Output Power | Transmit power level (e.g., -20 to +20 dBm) | Impacts communication distance and FCC compliance |
| Receiver Sensitivity | Minimum detectable signal level (e.g., -120 dBm) | Affects signal reliability in noisy environments |
| Impedance Matching | VSWR (Voltage Standing Wave Ratio) 2:1 | Ensures minimal signal reflection |
| Power Supply Requirements | Voltage/current specifications (e.g., 3.3V 5%) | Critical for system integration |
| Manufacturer | Representative Product | Key Features |
|---|---|---|
| Texas Instruments | AFE7444EVM | Quad-channel RF-sampling transceiver evaluation |
| STMicroelectronics | ST25RU3993-DISCO | UHF RFID reader IC development kit |
| Nordic Semiconductor | nRF52840-DK | Bluetooth 5.2 and Thread protocol testing |
| Impinj | Speedway R420 | UHF Gen2 RFID reader for logistics automation |
Key considerations include: - Frequency Compatibility: Match kit range with target application (e.g., Sub-1GHz vs 2.4GHz) - Development Ecosystem: Availability of SDKs, simulation software, and community support - Scalability: Modular design for future hardware expansion - Compliance Certifications: Pre-tested for FCC/CE regulatory standards - Cost-Performance Ratio: Balance between feature set and project budget
Emerging trends include: - Millimeter-wave Integration: Development kits supporting 24GHz+ for automotive radar - AI-Driven Testing: Embedded machine learning algorithms for signal optimization - Energy Harvesting Support: Ultra-low power RF modules for battery-free IoT devices - Cloud Integration: Over-the-air firmware updates and remote diagnostics - Standardization: Unified platform architectures across multiple vendors