| Image | Part Number | Description / PDF | Quantity | Rfq |
|---|---|---|---|---|
 |
Texas Instruments |
IC REDRIVER BLVDS 1CH 8SOIC |
0 |
|
 |
NXP Semiconductors |
IC REDRIVER I2C 2CH 400KHZ 8SO |
0 |
|
 |
Zetex Semiconductors (Diodes Inc.) |
IC REDRIVER DISPLAYPORT 36TQFN |
0 |
|
 |
Zetex Semiconductors (Diodes Inc.) |
ACTIVE DISPLAY V-QFN3590-42 TRAY |
0 |
|
 |
Zetex Semiconductors (Diodes Inc.) |
IC REDRIVER SAS/SATA 2CH 20TQFN |
0 |
|
 |
Zetex Semiconductors (Diodes Inc.) |
IC REDRIVER 5GBPS 4-LANE 72TQFN |
0 |
|
 |
NXP Semiconductors |
IC REDRIVER USB 3.0 12X2QFN |
0 |
|
 |
NXP Semiconductors |
IC REDRIVER I2C 2CH 400KHZ 8SO |
0 |
|
 |
Maxim Integrated |
IC REDRIVER PCIE 1CH 40TQFN |
0 |
|
 |
NXP Semiconductors |
IC REDRIVER USB 3.0 18DHXQFN |
0 |
|
 |
Zetex Semiconductors (Diodes Inc.) |
IC REDRIVER PCIE 4CH 84LFBGA |
0 |
|
 |
Zetex Semiconductors (Diodes Inc.) |
IC REDRIVER SATA2 2CH 20TQFN |
0 |
|
 |
Zetex Semiconductors (Diodes Inc.) |
IC REDRIVER USB 3.0 5GBPS 24TQFN |
0 |
|
 |
Renesas Electronics America |
IC REDRIVER SAS/SATA 100BGA |
0 |
|
 |
Zetex Semiconductors (Diodes Inc.) |
IC REDRIVER PCIE 4CH 100LBGA |
0 |
|
 |
Zetex Semiconductors (Diodes Inc.) |
IC REPEATER I2C LEVEL TRAN 8SOIC |
0 |
|
 |
Renesas Electronics America |
IC REDRIVER I2C 8CH 100BGA |
0 |
|
 |
Renesas Electronics America |
IC REDRIVER I2C 8CH 100BGA |
0 |
|
 |
Texas Instruments |
IC MULTIPLEXER LVDS 1CH 16SOIC |
0 |
|
 |
Zetex Semiconductors (Diodes Inc.) |
IC REDRIVER PCIE 4CH 56TQFN |
0 |
|
Signal buffers, repeaters, and splitters are critical components in electronic systems for maintaining signal integrity, extending transmission distances, and distributing signals across multiple channels. These ICs act as intermediaries in data pathways, ensuring reliable communication between devices by amplifying weak signals, regenerating degraded waveforms, or dividing input signals into multiple outputs. Their importance has grown exponentially with the rise of high-speed data networks, IoT ecosystems, and advanced industrial automation systems.
| Type | Functional Characteristics | Application Examples |
|---|---|---|
| Signal Buffers | High input impedance, low output impedance, signal amplification without inversion | Memory address drivers, bus interface circuits |
| Repeaters | Signal regeneration, noise filtering, timing recovery | Ethernet extenders, fiber optic communication |
| Splitters | Signal distribution, impedance matching, isolation between outputs | HDMI signal distribution, industrial sensor networks |
Typical IC construction includes: - Encapsulation: TSSOP, QFN, or BGA packages with 8-100+ pins - Internal Circuitry: Differential amplifiers, Schmitt triggers, termination resistors - Electrical Interface: Support for LVDS, RS-485, HDMI 2.1, or USB 3.2 standards - Thermal Management: Integrated heat spreaders or thermal pads for power dissipation
| Parameter | Importance |
|---|---|
| Bandwidth (0.1-10 Gbps) | Determines maximum data transfer rate |
| Propagation Delay (1-50 ns) | Impacts system timing synchronization |
| Signal-to-Noise Ratio (SNR) (>60 dB) | Measures transmission clarity |
| Power Consumption (100mW-2W) | Affects thermal design and efficiency |
| Impedance Matching (50 -100 ) | Minimizes signal reflections |
Key industries include: - Telecommunications: 5G base stations, optical network units - Consumer Electronics: Smart TVs, gaming consoles - Industrial Automation: PLC systems, sensor hubs - Automotive: CAN bus extenders, ADAS sensor interfaces - Medical Devices: MRI machine signal routing
| Manufacturer | Product Series | Key Features |
|---|---|---|
| Texas Instruments | SN74LVC1G125 | Low-voltage buffer with 85MHz bandwidth |
| NXP Semiconductors | PCA9306 | I2C bus voltage-level translation |
| STMicroelectronics | TS3DS1240 | 4-channel HDMI buffer with 2.5Gbps per lane |
Key considerations: - Match bandwidth requirements with application data rates - Verify voltage level compatibility (e.g., 1.8V/3.3V/5V logic) - Assess drive strength needs for connected loads - Consider package type for PCB space constraints - Analyze power budget and thermal management requirements - Evaluate EMI/ESD protection features for harsh environments
Emerging developments include: - Integration with protocol conversion (e.g., USB-C to DisplayPort) - Development of AI-enhanced signal conditioning algorithms - Adoption of advanced packaging (3D stacking, SiP) - Push toward ultra-low power (<1mW standby) designs - Increased demand for automotive-grade parts (AEC-Q100 qualified) - Growth in wireless interface buffer solutions for 6G infrastructure