| Image | Part Number | Description / PDF | Quantity | Rfq |
|---|---|---|---|---|
 |
3M |
FIRE BARRIER COMPOSITE SHEET 36" |
0 |
|
 |
3M |
FIRE BARRIER PILLOWS LGE 3"X6"X9 |
20 |
|
 |
3M |
FIRE BLOCK FOAM FB-FOAM, ORANGE, |
0 |
|
 |
3M |
FLAME BARRIER FRB-NC 3'X270' |
0 |
|
 |
3M |
FLAME BARRIER FRB-NC 3'X480' |
0 |
|
 |
3M |
FLAME BARRIER 8.5"x11" 1=1 SHEET |
0 |
|
 |
3M |
FIRE BARRIER PILLOWS MD 2"X6"X9 |
26 |
|
 |
3M |
FIRE BARRIER MOLDABLE PUTTY PADS |
25 |
|
 |
3M |
FLAME BARRIER 8.5X11" 1=1SHEET |
66 |
|
 |
3M |
FIRE BARRIER RATED FOAM, FIP 1-S |
8 |
|
 |
3M |
FIRE BARRIER PUTTY SLEEVE DT 400 |
1 |
|
 |
3M |
FLAME BARRIER FRB-NT 3'x795' |
0 |
|
 |
3M |
FIRE BARRIER MOLDABLE PUTTY PADS |
20 |
|
 |
3M |
FIRE BARRIER MP+ STICK IN TUBE |
23 |
|
 |
3M |
FIRE BARRIER DUCT WRAP 615+ 24" |
0 |
|
 |
3M |
FLAME BARRIER FRB-NT 3'X225' |
0 |
|
 |
3M |
FLAME BARRIER FRB-BK 3'X405' |
0 |
|
 |
3M |
COMMAND MULTI-HOOK WITH WATE |
0 |
|
 |
3M |
FIRE BARRIER COMPOSITE SHEET 16" |
1 |
|
 |
3M |
ENDOTHERMIC MAT 24.5" X 20' |
1 |
|
Miscellaneous hardware components refer to specialized mechanical elements that do not fall into standard fastener categories but are critical for structural integrity, functionality, and system integration. These components enable precise load distribution, vibration damping, cable management, and environmental protection in modern engineering systems. Their importance has grown with advancements in automation, miniaturization, and multi-functional design requirements across industries.
| Type | Functional Characteristics | Application Examples |
|---|---|---|
| Washers & Spacers | Distribute load, prevent loosening, maintain spacing | Aerospace bolted joints, plumbing systems |
| Cable Ties & Clips | Organize and secure wiring harnesses | Automotive wiring, data centers |
| Vibration Dampers | Isolate mechanical vibrations | Industrial machinery, HVAC systems |
| Threaded Inserts | Provide durable threads in soft materials | Aerospace composites, plastic enclosures |
| Anti-Rotation Pins | Prevent rotational movement in assemblies | Robotics, precision instruments |
Typical components feature: - Material Core: Steel alloys (8.8-12.9 grade), stainless steel (A2/A4), aluminum (6061-T6), or engineered polymers (nylon 6/6, PEEK) - Surface Treatment: Zinc plating (5-25 m), passivation, anodizing, or polymer coatings - Geometric Features: Precision-machined internal threads (M1.6-M24), tolerance class 6H/6g - Specialized Elements: Integrated O-rings, self-locking mechanisms, or conductive paths
| Parameter | Typical Range | Importance |
|---|---|---|
| Tensile Strength | 400-1,200 MPa | Determines load capacity |
| Vibration Resistance | 0-3,000 Hz operational range | System stability in dynamic environments |
| Temperature Range | -60 C to +300 C | Material performance under thermal stress |
| Corrosion Resistance | 1,000-4,000h salt spray test rating | Long-term durability |
| Electrical Conductivity | 0.01-60 MS/m | ESD protection requirements |
| Manufacturer | Key Products | Technical Features |
|---|---|---|
| MISUMI | FS Type Vibration Dampers | Load capacity: 500N, Frequency range: 10-2,000Hz |
| McMaster-Carr | 96510 Series Cable Glands | NPT thread sizes 1/4"-1", IP68 rating |
| 3M | Scotch-Weld Structural Adhesive | Tensile strength: 34MPa, 25min cure time |
| TR Fastenings | Self-Clinching Standoffs | M2-M6 thread sizes, clamp load: 8kN |
| Halder Components | 542 Series Anti-Vibration Mounts | Deflection: 3-10mm, 500,000 cycle durability |
Key considerations: - Environmental factors (temperature extremes, chemical exposure) - Mechanical requirements (dynamic vs static loads) - Regulatory compliance (ASTM F3148, ISO 2320) - Material compatibility with mating components - Assembly method constraints (hand tool vs automated installation) - Lifecycle cost analysis (maintenance intervals, replacement costs)
Current developments include: - Smart Fasteners: Integrated strain gauges for condition monitoring (e.g., Airbus A350 wing sensors) - Nano-coatings: DLC (Diamond-Like Carbon) treatments reducing friction coefficients to 0.05 - Additive Manufacturing: Complex lattice structures for weight reduction (NASA's 3D-printed fuel nozzles) - Multi-material Systems: Hybrid polymer-metal fasteners for EV battery packs - Sustainability: Biodegradable polymer anchors achieving 90% recyclability
Emerging applications in autonomous vehicles and 5G infrastructure are driving demand for components with 0.01mm positional accuracy and 10-year maintenance-free operation.