| Image | Part Number | Description / PDF | Quantity | Rfq |
|---|---|---|---|---|
 |
Laird Thermal Systems |
PELTIER OT12,66,F0,1211,GG,W2.25 |
40 |
|
 |
TE HIGH TEMP,127 COUPLES,H1,EP |
0 |
|
|
 |
Laird Thermal Systems |
PELTIER MS4,129,10,15,00,W8 |
78 |
|
 |
Marlow Industries, Inc. |
TEM 23.5X23.5X3.33MM |
0 |
|
 |
Laird Thermal Systems |
PELTIR MS2,010,06,06,11,11,00,W2 |
38 |
|
 |
CUI Devices |
PELTIER, 40 X 40 X 4, 6 A, WIRE |
147 |
|
 |
Laird Thermal Systems |
HOT20,65,F2A,1312,11 W2.25 |
14 |
|
 |
Laird Thermal Systems |
ETX15-28-F2-5252-TA-RT-W6 |
0 |
|
 |
CUI Devices |
PELTIER, 30 X 30 X 3.95, 6 A, WI |
59 |
|
 |
CUI Devices |
PELTIER MOD 40 X 3.8MM 8.5A INP |
3066 |
|
 |
Laird Thermal Systems |
HOT20,65,F2A,1312,11,RT,W2.25 |
10 |
|
 |
Laird Thermal Systems |
PELTIER HT6,7,F2,3030,TB,RT,W6 |
0 |
|
 |
TE GENERATOR 127 COUPLE |
0 |
|
|
 |
Laird Thermal Systems |
PELTIR ET20,31,F1A,0909,GG,W2.25 |
50 |
|
 |
Laird Thermal Systems |
ULTRATEC UTX SERIES, THERMOELECT |
8 |
|
 |
Laird Thermal Systems |
PELTIER MODULE CP2,71,06,L1,W4.5 |
0 |
|
 |
Laird Thermal Systems |
PELTIER MOD CP10,63,06,L1,W4.5 |
0 |
|
 |
Laird Thermal Systems |
ET2.3,49,F1,1919,TA,RT,W6 |
19 |
|
 |
Laird Thermal Systems |
ET8,7,F2,3030,TA,RT,W6 |
0 |
|
 |
Laird Thermal Systems |
ULTRATEC UTX SERIES, THERMOELECT |
0 |
|
Thermoelectric Peltier Modules (TEMs) are solid-state devices that utilize the Peltier effect to transfer heat between two electrical junctions. When direct current (DC) passes through a thermoelectric material, heat is absorbed on one side and released on the opposite side. These modules enable precise temperature control without moving parts, refrigerants, or maintenance, making them critical in modern electronics, medical devices, and industrial systems.
| Type | Functional Features | Application Examples |
|---|---|---|
| Standard TEMs | Balanced cooling capacity and cost | Industrial temperature control systems |
| High-Power TEMs | High T (temperature difference) and large heat pumping capacity | Laser diode cooling, power electronics |
| Microminiature TEMs | Sub-centimeter dimensions with precise thermal regulation | Medical sensors, infrared detectors |
| Multistage TEMs | Cascaded design for ultra-low temperature applications | Cryogenic systems, scientific instruments |
A typical Peltier module consists of: - Ceramic substrates (high thermal conductivity electrical insulation) - Thermoelectric elements (Bismuth Telluride - Bi2Te3 based semiconductors) - Copper interconnects (low electrical resistance) - Solder junctions (thermal and electrical bonding) - Epoxy encapsulation (moisture protection)
| Parameter | Description | Importance |
|---|---|---|
| Qmax (W) | Maximum heat pumping capacity | Determines cooling capability |
| Tmax ( C) | Maximum temperature difference | Defines operational limits |
| Imax (A) | Maximum operating current | Impacts power consumption |
| ZT Value | Thermoelectric figure of merit | Material efficiency indicator |
| Dimensions (mm) | Physical size | Integration constraints |
Main industries include: - Electronics: CPU/GPU cooling, telecom equipment - Medical: PCR thermal cyclers, patient care devices Automotive: Battery thermal management, cabin climate control Scientific: Spectroscopy instruments, CCD cooling
| Manufacturer | Representative Product | Key Features |
|---|---|---|
| Laird Thermal Systems | HiTemp Series | Tmax=72 C, 200W capacity |
| TE Connectivity | CP Series TEC | Miniature 10 10mm footprint |
| II-VI Incorporated | Laser Diode Cooler | High-reliability multistage design |
Key considerations: - Required T and heat load calculations - Operating voltage/current compatibility - Physical space constraints - Environmental conditions (humidity, vibration) - Cost vs. efficiency trade-offs
Future developments focus on: - Advanced materials (Skutterudites, silicon-germanium) - Micro-scale integration for mobile devices - Smart modules with PID temperature control - Eco-friendly thermoelectric materials - 3D-printed customized geometries