| Image | Part Number | Description / PDF | Quantity | Rfq |
|---|---|---|---|---|
 |
Analog Devices, Inc. |
EVAL BOARD FOR ADP5134 |
1 |
|
 |
Analog Devices, Inc. |
LTM8053 DEMO BOARD - 40VIN, 3.5A |
12 |
|
 |
Analog Devices, Inc. |
EVAL BOARD FOR LTM4607 |
2 |
|
 |
Analog Devices, Inc. |
BOARD EVAL FOR LT1374CFE |
2 |
|
 |
Analog Devices, Inc. |
EVAL BOARD FOR LTC3121 |
5 |
|
 |
Analog Devices, Inc. |
LT7101 DEMO BOARD |
7 |
|
 |
Analog Devices, Inc. |
EVAL BOARD BOOST REG LTC3458 |
1 |
|
 |
Analog Devices, Inc. |
BOARD EVAL FOR LT1610CMS8 |
1 |
|
 |
Analog Devices, Inc. |
READYKIT 2.8/5.0 ADP2504 |
0 |
|
 |
Analog Devices, Inc. |
BOARD EVAL FOR LT1371CR |
1 |
|
 |
Analog Devices, Inc. |
EVAL BOARD FOR LTC3875EU |
1 |
|
 |
Analog Devices, Inc. |
BOARD EVAL FOR LT3781EG |
2 |
|
 |
Analog Devices, Inc. |
BOARD EVAL FOR LTC1503CMS8 |
2 |
|
 |
Analog Devices, Inc. |
BOARD EVAL FOR ADP1879-0.3 |
5 |
|
 |
Analog Devices, Inc. |
BOARD EVAL FOR LTC3838EUHF |
1 |
|
 |
Analog Devices, Inc. |
BOARD EVAL FOR LT3489EMS8E |
1 |
|
 |
Analog Devices, Inc. |
EVAL BOARD BUCK REG LTC3604 |
1 |
|
 |
Analog Devices, Inc. |
BOARD DEMO FOR LT3430EFE |
1 |
|
 |
Analog Devices, Inc. |
EVAL BOARD LTC3307A DEMO 5V 3A |
26 |
|
 |
Analog Devices, Inc. |
BOARD EVAL FOR ADP5034-1 |
1 |
|
Evaluation boards (EVBs) for DC/DC and AC/DC switch-mode power supplies (SMPS) are specialized hardware platforms designed to demonstrate and validate the performance of power management integrated circuits (PMICs) and power modules. These boards enable engineers to assess critical parameters such as efficiency, thermal behavior, and dynamic response before integrating power solutions into end systems. With global demand for energy-efficient electronics growing, SMPS evaluation boards play a vital role in accelerating the development of power systems for applications ranging from consumer devices to industrial machinery.
| Type | Functional Characteristics | Application Examples |
|---|---|---|
| Isolated AC/DC EVBs | Galvanic isolation, safety-certified designs | Medical power supplies, industrial SMPS |
| Non-Isolated DC/DC EVBs | Compact footprint, high-frequency operation | Point-of-load converters, telecom systems |
| Wide Bandgap (WBG) EVBs | GaN/SiC device evaluation, high-power density | Fast chargers, renewable energy systems |
| Digital Power EVBs | PMBus/PIC interfaces, programmable control | Server power, smart grid equipment |
Typical SMPS evaluation boards consist of: - PCB substrate with 2-10 layers for thermal management - Power stage components: MOSFETs, IGBTs, or wide-bandgap devices - Control circuitry: PWM controllers, gate drivers - Input/Output interfaces: Screw terminals, barrel connectors - Measurement points for voltage/current waveforms - Thermal vias and heatsinks for power dissipation
| Parameter | Description | Importance |
|---|---|---|
| Input Voltage Range | 90-264V AC or 12-48V DC | Defines compatibility with power sources |
| Output Power | 5W-1kW typical | Determines application suitability |
| Efficiency | >85% (varies by topology) | Energy saving and thermal performance |
| Switching Frequency | 20kHz-5MHz | Affects component size and EMI |
| Protection Features | OVP/OCP/OTP | Ensures reliability under faults |
| Manufacturer | Representative Product | Key Features |
|---|---|---|
| TI (Texas Instruments) | LMG3410EVM-001 | GaN FET evaluation with 1200V rating |
| STMicroelectronics | STEVAL-ISA1850V1 | 650V SiC-based active clamp flyback |
| Infineon | IMW120R048M1H-EVM | WBG evaluation for 1200V/450A systems |
| Analog Devices | LTC7801EV | High-efficiency synchronous buck controller |
Key considerations include: - Matching input/output requirements to application needs - Isolation requirements for safety-critical systems - Availability of design files and software tools - Compliance with standards (e.g., IEC 61558 for medical) - Cost vs. performance trade-offs - Thermal management capabilities
Emerging trends include: - Adoption of GaN/SiC devices enabling >95% efficiency - Integration of digital control via PMBus interfaces - Development of ultra-high-density converters (>100W/cm ) - Emphasis on low EMI designs for automotive applications - Cloud-connected evaluation platforms for remote testing