| Image | Part Number | Description / PDF | Quantity | Rfq |
|---|---|---|---|---|
 |
Analog Devices, Inc. |
BOARD EVAL FOR LTC3862EUH |
3 |
|
 |
Analog Devices, Inc. |
BOARD EVAL FOR LTC1436CGN-PLL |
2 |
|
 |
Analog Devices, Inc. |
ADP1071 12.1V EVALUATION BOARD |
10 |
|
 |
Analog Devices, Inc. |
BOARD EVAL FOR LT1930AES5 |
1 |
|
 |
Analog Devices, Inc. |
EVAL BOARD FOR ADP5300 |
4 |
|
 |
Analog Devices, Inc. |
BOARD EVAL FOR LT3825EFE |
1 |
|
 |
Analog Devices, Inc. |
BOARD EVAL FOR LT8309ES5 |
0 |
|
 |
Analog Devices, Inc. |
DEMO BOARD FOR LT3753EFE |
2 |
|
 |
Analog Devices, Inc. |
EVAL BOARD BUCK REG/LDO ADP5041 |
0 |
|
 |
Analog Devices, Inc. |
BOARD EVAL FOR LT1533CS |
0 |
|
 |
Analog Devices, Inc. |
EVAL BOARD BUCK REG LTC3880 |
1 |
|
 |
Analog Devices, Inc. |
BOARD EVAL LTM8029 |
0 |
|
 |
Analog Devices, Inc. |
LTM4668A DEMOBOARD 17V,1.2A QUAD |
0 |
|
 |
Analog Devices, Inc. |
EVAL BOARD BUCK REG LTC3880 VB |
1 |
|
 |
Analog Devices, Inc. |
LTC3636EUFD DEMO BOARD - 3.1V TO |
15 |
|
 |
Analog Devices, Inc. |
LTC3310S DEMO BOARD 5V, 10A SYNC |
36 |
|
 |
Analog Devices, Inc. |
LT8604 HIGH EFFICIENCY 42V, 120M |
9 |
|
 |
Analog Devices, Inc. |
BOARD EVAL LTM4676. |
2 |
|
 |
Analog Devices, Inc. |
LT8705AEUHF DEMO BOARD VIN = 36V |
13 |
|
 |
Analog Devices, Inc. |
BRD,18V,12A HI EFF STEPDOWN REG |
1 |
|
Evaluation boards (EVBs) for DC/DC and AC/DC switch-mode power supplies (SMPS) are specialized hardware platforms designed to demonstrate and validate the performance of power management integrated circuits (PMICs) and power modules. These boards enable engineers to assess critical parameters such as efficiency, thermal behavior, and dynamic response before integrating power solutions into end systems. With global demand for energy-efficient electronics growing, SMPS evaluation boards play a vital role in accelerating the development of power systems for applications ranging from consumer devices to industrial machinery.
| Type | Functional Characteristics | Application Examples |
|---|---|---|
| Isolated AC/DC EVBs | Galvanic isolation, safety-certified designs | Medical power supplies, industrial SMPS |
| Non-Isolated DC/DC EVBs | Compact footprint, high-frequency operation | Point-of-load converters, telecom systems |
| Wide Bandgap (WBG) EVBs | GaN/SiC device evaluation, high-power density | Fast chargers, renewable energy systems |
| Digital Power EVBs | PMBus/PIC interfaces, programmable control | Server power, smart grid equipment |
Typical SMPS evaluation boards consist of: - PCB substrate with 2-10 layers for thermal management - Power stage components: MOSFETs, IGBTs, or wide-bandgap devices - Control circuitry: PWM controllers, gate drivers - Input/Output interfaces: Screw terminals, barrel connectors - Measurement points for voltage/current waveforms - Thermal vias and heatsinks for power dissipation
| Parameter | Description | Importance |
|---|---|---|
| Input Voltage Range | 90-264V AC or 12-48V DC | Defines compatibility with power sources |
| Output Power | 5W-1kW typical | Determines application suitability |
| Efficiency | >85% (varies by topology) | Energy saving and thermal performance |
| Switching Frequency | 20kHz-5MHz | Affects component size and EMI |
| Protection Features | OVP/OCP/OTP | Ensures reliability under faults |
| Manufacturer | Representative Product | Key Features |
|---|---|---|
| TI (Texas Instruments) | LMG3410EVM-001 | GaN FET evaluation with 1200V rating |
| STMicroelectronics | STEVAL-ISA1850V1 | 650V SiC-based active clamp flyback |
| Infineon | IMW120R048M1H-EVM | WBG evaluation for 1200V/450A systems |
| Analog Devices | LTC7801EV | High-efficiency synchronous buck controller |
Key considerations include: - Matching input/output requirements to application needs - Isolation requirements for safety-critical systems - Availability of design files and software tools - Compliance with standards (e.g., IEC 61558 for medical) - Cost vs. performance trade-offs - Thermal management capabilities
Emerging trends include: - Adoption of GaN/SiC devices enabling >95% efficiency - Integration of digital control via PMBus interfaces - Development of ultra-high-density converters (>100W/cm ) - Emphasis on low EMI designs for automotive applications - Cloud-connected evaluation platforms for remote testing