| Image | Part Number | Description / PDF | Quantity | Rfq |
|---|---|---|---|---|
 |
Olimex |
USB ETHERNET ADAPTER OLINUXINO |
537 |
|
 |
Olimex |
SD CARD LOADED WITH LINUX |
0 |
|
 |
Olimex |
6 - 10 PIN CROSS CONNECTION ADAP |
86 |
|
 |
Olimex |
DATA/TOUCHSCREEN CABLE FOR OLINU |
0 |
|
 |
Olimex |
TOUCHSCREEN CABLE FOR OLINUXINO |
0 |
|
 |
Olimex |
MICRO SD CARD DEBIAN LINUX |
0 |
|
 |
Olimex |
ECG CABLE 3 WIRES FOR GEL ELECTR |
0 |
|
 |
Olimex |
PASSIVE ELECTRODE FOR SHIELD |
11 |
|
 |
Olimex |
JTAG ADAPTER FOR ARM-USB-TINY-H |
4086 |
|
 |
Olimex |
1000V ISOLATOR FOR DEV AUDIO DAC |
134 |
|
 |
Olimex |
DEBUG ADAPTER FOR ARM-USB-TINY-H |
29 |
|
 |
Olimex |
PASSIVE ELECTRODE FOR SHIELD |
15 |
|
 |
Olimex |
MOD-RS485 RS485 ADAPTER MODULE |
0 |
|
 |
Olimex |
OLIMEX EMBEDDDED MODULE |
0 |
|
 |
Olimex |
MODULE RGB 3X5A RGB PWM CTRL |
0 |
|
 |
Olimex |
MODULE ADAPTER RS485 ISOLATED |
0 |
|
 |
Olimex |
MICROCHIP ICSP PROG ADAPTER SET |
14 |
|
 |
Olimex |
UEXT ADAPTER MODULE RS232 |
7 |
|
 |
Olimex |
SATA DATA AND POWER LEAD SET |
0 |
|
 |
Olimex |
LINUX SDCARD A13-OLINUXINO-MICRO |
0 |
|
Development board accessories are essential components that extend the functionality of microcontroller/processor development platforms. These accessories include interface cables, power modules, sensor modules, expansion boards, and debugging tools that enable rapid prototyping and system integration. As core enablers for embedded system development, IoT prototyping, and industrial automation, these accessories significantly reduce development time while improving hardware compatibility and measurement accuracy.
| Type | Functional Features | Application Examples |
|---|---|---|
| Interface Cables | High-speed data transfer, hot-plugging support | USB-UART converters, HDMI breakout cables |
| Power Modules | Regulated voltage output, battery management | Lipo battery packs, DC-DC converters |
| Sensor Modules | Digital/analog signal acquisition, calibration-free | Temperature/humidity sensors, IMUs |
| Expansion Boards | Peripheral interface extension, protocol conversion | Motor drivers, LoRaWAN shields |
| Debugging Tools | Real-time tracing, voltage measurement | JTAG probes, logic analyzers |
Typical accessories feature: - Hardware Shell: Flame-retardant ABS or CNC-machined aluminum for mechanical protection - Interface Circuits: Level shifters and ESD protection components - Communication Modules: SPI/I2C/UART protocol converters - Power Conditioning: Voltage regulators and current limiting circuits - Mechanical Components: Mounting brackets and anti-vibration pads
| Parameter | Description |
|---|---|
| Interface Compatibility | Supports USB 3.0, SPI up to 10MHz, I2C 400kHz |
| Power Handling | 1.8V-24V input range, 5A max current |
| Signal Integrity | 12-bit ADC resolution (0.01% error), 1ns jitter |
| Environmental Rating | Operating temp: -40 C to +85 C, IP54 dust/water resistance |
| EMC Compliance | FCC Part 15 Class B, CE EN55032 |
| Manufacturer | Representative Products |
|---|---|
| Arduino | Arduino MKR Shield, Nano I/O Breakout |
| Raspberry Pi | Pico W Expansion Board, HAT+ Prototyping |
| STMicroelectronics | ST-Link/V2 Debugger, X-NUCLEO Expansion |
| Texas Instruments | LaunchPad SensorHub, BoosterPack MKII |
Key considerations: - Project requirements: Match sensor types and communication protocols - Compatibility: Verify voltage levels and physical dimensions - Expandability: Check available GPIO and bus interfaces - Cost-effectiveness: Balance performance vs. budget - Environmental factors: Temperature range and vibration resistance - Support ecosystem: Availability of libraries and community resources
Emerging trends include: - Wireless integration (Bluetooth/WiFi 6 modules) - AI-enabled sensor fusion algorithms - Modular system-in-package (SiP) designs - Open-source hardware standardization - Energy-harvesting power solutions - Increased adoption of 2.54mm standardization